IBM THINKPAD X40 Hardware Maintenance Manual

Key
combination
Description
Fn+F9 Issue device ejection
Opens
the IBM ThinkPad EasyEject Utility
screen. Buttons for the following choices are
displayed:
v Run EasyEject Actions: User can select,
stop, and remove external devices connected
to the ThinkPad computer.
v Configure EasyEject Actions: User can
open the IBM ThinkPad EasyEject Utility
main window.
v Fn+F9 Settings: User can configure the
settings for the Fn+F9 function.
Note:
This function is supported only in
Windows XP and Windows 2000.
Fn+F10 Reserved.
Fn+F11 Reserved.
Fn+F12 Hibernation
Turn
hibernation mode on. To return to normal
operation, press the power button for less than
four seconds.
Note: To use Fn+F12 for hibernation in
Windows XP and Windows 2000, the IBM PM
device driver must have been installed on the
computer.
Fn+PgUp ThinkPad light
Note:
This function is supported only on the
ThinkPad computer that have the ThinkLight.
The on or off status of the ThinkLight is shown
on the screen for a few seconds when the user
press Fn+PgUp.
Fn+Home LCD brightness up
The
LCD becomes brighter.
Fn+End LCD brightness down
The
LCD becomes less bright.
Fn+Spacebar FullScreen magnifier
Enable
the FullScreen Magnifier function.
Product overview
56 ThinkPad X40 (2369, 2370, 2371, 2372, 2382, 2386)

IBM THINKPAD X40 Specifications

General

Brand	IBM
Model	THINKPAD X40
Category	Desktop
Language	English