IBM THINKPAD X40 - Page 86

When installing: Please follow the steps below.
1. Attach the connector.
2. Make sure that the keyboard edges, shown in the step
1, are under the frame. Then press the keys
indicated by step 2 to latch the keyboard firmly in
place.
1
1
2
3. To make sure that the front side of the keyboard is
housed firmly, gently press the keys with your thumbs
and try to slide the keyboard toward you.
3
3
4. Secure the keyboard by tightening the screws from the
bottom side of the computer.
Removing and replacing a FRU
ThinkPad X40 81