v CMRTS (Request_To_Send)
v CMSCT (Set_Conversation_Type)
v CMSDT (Set_Deallocate_Type)
v CMSED (Set_Error_Direction)
v CMSEND (Send_Data)
v CMSERR (Send_Error)
v CMSF (Set_Fill)
v CMSLD (Set_Log_Data)
v CMSMN (Set_Mode_Name)
v CMSPLN (Set_Partner_LU_Name)
v CMSPTR (Set_Prepare_To_Receive_Type)
v CMSRC (Set_Return_Control)
v CMSRT (Set_Receive_Type)
v CMSSL (Set_Sync_Level)
v CMSST (Set_Send_Type)
v CMSTPN (Set_TP_Name)
v CMTRTS (Test_Request_To_Send_Received)
The SAA CPI Communications calls are described in SAA Common Programming
Interface Communications Reference.
The following APPC/MVS calls are supported under the LU62 host command
environment:
v ATBALC2 (Allocate)
v ATBALLC (Allocate)
v ATBCFM (Confirm)
v ATBCFMD (Confirmed)
v ATBDEAL (Deallocate)
v ATBFLUS (Flush)
v ATBGETA (Get_Attributes)
v ATBGETC (Get_Conversation)
v ATBGETP (Get_TP_Properties)
v ATBGETT (Get_Type)
v ATBGTA2 (Get_Attribute)
v ATBPTR (Prepare_To_Receive)
v ATBRCVI (Receive_Immediate)
v ATBRCVW (Receive_And_Wait)
v ATBRTS (Request_To_Send)
v ATBSEND (Send_Data)
v ATBSERR (Send_Error)
Note: The numeric suffix within the service name indicates the MVS release in
which the service was introduced and thereby also available in all
subsequent releases, as follows:
none MVS SP4.2 service. For example, ATBGETA
1 MVS SP4.2.2 service. For example, ATBTEA1
Issuing Other Types of Commands from an Exec
Chapter 8. Entering Commands from an Exec 105
To Next Page
Loading...
Need help?
General
