EasyManua.ls Logo

IBM x3630 M3 - Standard Specifications

IBM x3630 M3
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IBM System x3630 M3 7
Standard specifications
Table 1. Standard specifications (part 1)
Components Specification
Form factor 2U rack.
Processor Up to two six-core (up to 3.06 GHz) or quad-core (up to 3.2 GHz) Intel Xeon 5600 series
processors with QuickPath Interconnect technology up to 6.4 GT/s, and up to 1333 MHz
memory speed. Up to two four-core (up to 2.26 GHz) or dual-core (2.0 GHz) Intel Xeon
5500 series processors.
Memory cache Up to 12 MB L3 for Intel Xeon 5600 series processors. Up to 4 MB L3 for Intel Xeon 5500
series processors.
Chipset Intel 5500.
Memory DIMM slots 12 DDR3 DIMM slots (6 per installed processor).
Memory capacity Up to 192 GB with 16 GB DDR3 RDIMMs and 12 populated DIMM slots (up to 96 GB with
six DIMMs per processor).
Memory protection ECC, ChipKill (for x4-based memory DIMMs), and Memory Mirroring.
Disk drive bays Up to 14 hot-swap 3.5-inch SAS/SATA HDDs, or up to 28 hot-swap 2.5-inch SAS/SATA
HDDs.
Maximum internal
storage
Up to 33.6 TB with 1.2 TB 2.5" SAS HDDs, or up to 44.8 TB with 1.6 TB SAS HDDs, or up
to 42 TB with 3 TB 3.5" HDDs. Intermix of SAS/SATA is supported.
RAID support RAID 0, 1, 1E with ServeRAID M1015. Optional upgrade to RAID-5. RAID 0, 1, 5, 10, 50
with ServeRAID M5014 or M5015. Optional upgrade to RAID 6 and 60.
Optical drive bays None.
Tape drive bays None.
Network interfaces Integrated 2-port Gigabit Ethernet.
PCI Expansion slots Two PCI Express 2.0 slots:
One PCI Express 2.0 x16 (x8 wired)
One PCI Express 2.0 x8 (x8 wired) (for the standard ServeRAID controller)
External ports Front: Two USB 2.0 ports.
Rear: Two USB 2.0, one DB-15 video, one DB-9 serial, one RJ-45 systems
management, two RJ-45 Gigabit Ethernet network ports.
Internal: One internal USB port for embedded hypervisor.
Cooling IBM Calibrated Vectored Cooling™ with four counter-rotating non-hot-swap fans with N+1
redundancy.
Power supply Up to two redundant hot-swap 675 W AC or 675 W high-efficiency (HE) AC power
supplies with 90%+ efficiency.
Hot-swap components Hard drives, power supplies.
Systems management UEFI, IBM Integrated Management Module (IMM), Predictive Failure Analysis, Light Path
Diagnostics, Automatic Server Restart, IBM Systems Director* and IBM Systems
Director Active Energy Manager™, IBM ServerGuide. Optional Virtual Media Key for
remote presence (graphics, keyboard and mouse, virtual media).
Security features Power-on password, administrator's password.

Related product manuals