Need help?Do you have a question about the Ibml ImageTrac 6000 Series and is the answer not in the manual?
Descriptions of icons used in the manual for drawing attention to important information.
Explanation of hazard, caution, and laser energy symbols for safe operation.
Details on when to seek qualified service personnel and precautions for unit servicing.
Guidelines on operating conditions and operator behavior for safety and efficiency.
Lists necessary tools for installation and specifies external power requirements.
Details operating temperature, humidity, and altitude limits for the equipment.
Provides layout and ventilation area needs for the 6300 Class Single Pocket Frame.
Details dimensions for the 6400 Class and lists the weights for various frame components.
Procedure for unpacking crated international shipments, including removing panel brackets.
Steps for unpacking uncrated domestic shipments secured to pallets.
Details on using connector braces for frame-to-frame connection.
Use of stabilizing braces and locking wheel brakes for scanner stability.
How to connect and secure grounding straps between frame bases.
Details on connecting power cables for proper functionality across all frames.
Explains the function and naming of sockets on the main DC distribution board.
Details on 24V/5V sockets and emergency stop/operator switches.
Connecting Ethernet and transport cables between frames.
Connecting camera data cables to JSE boards and managing them.
Attaching the cable management system to the EAC rack mount.
Locating and connecting power cables to the Embedded Application Controller.
Connecting USB and video cables for the monitor to the EAC.
Connecting blue Cat 5 for customer network, green for transport controller.
Attaching the monitor to the armature using provided hardware.
How to adjust armature tension if it is not satisfactory.
Connecting the main power supply and setting the main breaker.
Turning on the EAC, monitor, and Transport PC following startup procedures.
Operation of emergency stop buttons to shut down power to transport motors.
Placement and function of idle rollers on the transport surface to keep documents flat.
Lists contents of the over pack box and notes on shipping and software.
Visual representation of system connections and components (Part 1).
Visual representation of system connections and components (Part 2).
To Next Page
General