IC Medical CRYSTAL VISION 450D

To Next Page

I. C. MEDICAL, INC.

CRYSTAL VISION

Model 450D

ICM-450-0000

OPERATING AND INSTALLATION MANUAL

I. C. Medical, Inc.

15002 North 25th Drive

Phoenix, Arizona 85023 USA

Tel: +1(623) 780-0700 (USA)

Fax: +1(623) 780-0887 (USA)

MDSS GmbH

Schiffgraben 41

30175 Hannover, Germany

Made in USA

Document#: ICM-450-9000 Rev. N Date: 2021-03

REF

Main Page

Table of Contents2
Limited Warranty4
Important Safeguards and Notices5
Serious Adverse Events5
General Warnings6
Contraindications6
General Cautions6
Compatibility7
Specifications8
Installation/Operations Instructions10
Filters and Power Cord Installation11
Figure 1: Filters and Power Cord Installation11
Esu, Rf, or Universal Sensor Installation12
Figure 2: ESU and RF Sensor Installation When Used with an Electrosurgical Generator (ESU)12
Figure 3: UNIVERSAL BLUE RF Sensor Installation When Used with an Electrosurgical Generator (ESU)13
Foot Switch Installation/Operation14
Figure 4: UNIVERSAL BLUE RF Sensor Installation When Used with Harmonic Scalpel Generator14
Figure 5: Foot Switch Installation14
Laser Sensor Installation15
Figure 6: Laser Sensor Installation15
Figure 7: Laser Sensor Installation to the SIDE of the Laser Foot Switch HOUSING15
Figure 8: Sensors Should be Positioned so that any Movement of the Pedal Interrupts the Beam16
Check Proper Operation of the Crystal Vision17
Figure 9: ON/OFF Power Switch Description17
Figure 10: Manual and Time Control Locations17
Figure 11: Flow Buttons18
Description of Switches, Control Buttons & Indicators19
Figure 12: ON/OFF Power Switch Location19
Figure 13: Manual Button and Sensor Connectors19
Figure 14: Adjustment for Time Setting20
Figure 15: Setting the Flow RANGE20
Figure 16: Selecting the Desired Flow21
Figure 17: Front Panel Indicators21
Large Coconut Charcoal Output Filter22
Laparoscopic Operation23
Figure 19: Laparoscopy Set up When Using ESU and Crystal Vision23
Figure 20: Laparoscopy Set up When Using CO Laser and Crystal Vision23
Non-Laparoscopic Gynecology Procedures25
Figure 21: Set up for Gynecology Procedure for Either ESU or CO 2 Laser Delivered through a Colposcope or Micromanipulator25
Other Non-Laparoscopic Procedures26
Figure 22: Set up for Using CRYSTAL VISION® with an ESU System During an Open Procedure26
Figure 23: Set-Up for Using a CRYSTAL VISION ® with a Laser Hand Piece26
Theory of Operation28
Pneumatic Circuits28
Electronic Circuits28
Start Pump28
Stop Pump28
Time Setting28
Flow Setting29
Open Mode29
Lap Mode29
Trouble Shooting Guide30
Preventive Maintenance32
Cleaning Instructions32
Hospital Level Calibration Instructions33

Need help?

Do you have a question about the IC Medical CRYSTAL VISION 450D and is the answer not in the manual?

IC Medical CRYSTAL VISION 450D Specifications

General

Brand	IC Medical
Model	CRYSTAL VISION 450D
Category	Medical Equipment
Language	English

IC Medical CRYSTAL VISION 450D - User Manual

Table of Contents

IC Medical CRYSTAL VISION 450D Specifications