Page 6
After having the rescue system packed, please ensure that rescue system and
harness fit to each other. The force measured in the deployment handle should be
between 50 and 80 N.
Pulling the packing line trough the fixing loops
To help you pack the rescue system, use a short piece of old paraglider line and
thread it through all the apex fixing loops.
The fixing loops are on the upper third of the canopy.
Attach the apex to a stable fixed point.
Dividing and sorting the
Suspension lines
Next sort out the suspension lines.
Please make sure that the middle lines
are in the middle and the other lines to the
side.
There must not be any tangles or knots in
the lines.
To Next Page
Loading...