1
Introduction
Thank you for purchasing the ICC DNET-100 DeviceNet Multiprotocol Network
Gateway. The DNET-100 allows information to be transferred seamlessly
between different fieldbus networks with minimal configuration requirements.
The DNET-100 provides a DeviceNet connection (the “primary” network), as
well as secondary network connections comprised of an RS-485 port and three
independent common serial ports for direct connectivity to Toshiba 7-series, 9-
series or VF-nC1 Adjustable Speed Drives (ASDs). These various
communication ports currently provide support for the following networks:
DeviceNet (primary network port)
Modbus RTU (RS-485 master)
Sullair Supervisor network (RS-485 master)
Toshiba ASD (common serial master)
New secondary network drivers are continuously being added, and can be
downloaded for free from our web site.
Before using the DNET-100 network gateway, please familiarize yourself with
the product and be sure to thoroughly read the instructions and precautions
contained in this manual. In addition, please make sure that this instruction
manual is delivered to the end user of the DNET-100, and keep this instruction
manual in a safe place for future reference or unit inspection.
This instruction manual describes the device specifications, wiring methods,
maintenance procedures, supported functions, usage methods and firmware
update procedures for the DNET-100 network gateway.
For the latest information, support, firmware releases or product point files,
please visit http://www.iccdesigns.com
.
Before continuing, please take a moment to ensure that you have received all
materials shipped with your kit. These items are:
• DNET-100 interface in DIN rail mountable case
• 2 meter DB9-RJ45 MMI port cable (part number 10425)
• This manual
DeviceNet is a trademark of Open DeviceNet Vendor Association, Inc.
To Next Page
Loading...