Need help?Do you have a question about the Ice Bear PST300-19 and is the answer not in the manual?
Expresses gratitude and introduces the motorcycle's design and purpose.
Emphasizes the importance of the first 1600 km for motorcycle life and performance.
Explains the special meanings of WARNING, CAUTION, and NOTE for user safety and machine care.
Provides instructions on adding accessories to avoid unbalance, ensure safety, and prevent damage.
Stresses helmet use, proper dress, and thoroughly reviewing the owner's manual.
Advises riding within skill limits and outlines accident prevention measures.
Warns against illegal modifications and explains serial number location.
Identifies controls and indicators on the handlebar, including mirrors, levers, and switches.
Labels key body parts like rear shock, fuel tank cap, and footrest.
Identifies front wheel, rear wheel, and oil drain screw on the frame.
Explains the function of the keys and the two positions of the spark switch.
Details how to open the fuel tank cap using the ignition key.
Describes the speedometer, water temperature indicator, and fuel indicator.
Provides fuel tank capacity and describes the feed water position.
Explains the operation of the variable switch for headlights and other lights.
Details the left-right turning signal buttons, horn button, and right steering system components.
Explains the engine stop switch, front brake lever, and throttle grip operation.
Describes the light button functions and the engine start button with cautions.
Describes the rear shock absorber design and the reversing gear device operation.
Specifies the recommended fuel type and octane rating for the motorcycle.
Details the recommended engine oil types and standards for use.
Explains the importance and guidelines for proper running-in of a new motorcycle.
Advises on varying engine speed and avoiding constant low speed during break-in.
Stresses allowing oil circulation and performing necessary periodic maintenance.
Warns that 1000km maintenance should follow specifications and pay attention to notes and warnings.
Lists essential items to check, including steering, brakes, tires, lights, and fluids.
Provides crucial warnings for new riders, including practicing in a safe area and avoiding one-handed riding.
Details the procedure for starting a cold engine, including fuel cock and key positions.
Advises against racing the engine and warns about starting motors for too long.
Provides notes for cold starting in cold areas and warns against starting in staff rooms.
Warns about braking techniques, distance, and proper parking procedures.
Introduces periodic service intervals and the general inspection process.
Advises on service frequency for specific components and suggests authorized service.
Emphasizes the necessity of periodic checking and maintenance for safety and longevity.
Presents a chart detailing service items, intervals (km/months), and required actions.
Mentions the set of tools included and where to find the accumulator.
Provides cautions for accumulator handling and explains the method of charging sealed accumulators.
Explains air cleaner filter cleaning, maintenance, and operational cautions.
Suggests qualified spark plug parts and mentions pulling out the spark cap.
Describes how to check the engine oil level using the dipstick after the engine has stopped.
Guides on spark plug cleaning, gap adjustment, replacement, and selection.
Details checking the oil level between upper and lower marks, and adding oil if needed.
Outlines steps for draining old oil, replacing the filter, and adding new oil.
Explains the carburetor's stable function and adjustment points like idle speed.
Advises on entrusting dealers for drive chain replacement and performing regular checks.
Details cleaning the drive chain with detergent and oiling it with special chain oil.
Explains how to adjust drive chain slack and warns about excessive slack causing accidents.
Details brake system inspection, brake fluid handling, and safety precautions.
Lists checks for the brake system (dripping, cracks, pads) and warns about new brake pads.
Advises checking tire wear and inflation pressure for riding safety before riding.
Lists tire specifications and warns against riding on certain road conditions.
Explains the importance of correct tire pressure and checking for wear or damage.
Specifies when to replace front and rear tires based on tread depth.
Guides on replacing bulbs and introduces the fuse box and its purpose.
Explains fuse function, checking it when the motorcycle is dead, and troubleshooting starting issues.
Details how to test if the ignition system is working by checking for sparks from the spark plug.
Warns about spark plug placement and addresses engine impetus issues.
Advises on servicing by authorized centers and provides guidance on cleaning the motorcycle.
Provides guidance for extended storage to reduce deterioration and necessary repairs before storing.
Explains how to prepare the motorcycle after storage and conduct test rides.
States the manual is a permanent component and should be kept with the motorcycle.
Notes that information is based on the latest product info and Zhenhua reserves the right to make changes.
To Next Page
General
