ICE N'GO PRO RINK User Manual

PLEASE READ INSTRUCTIONS
CAREFULLY BEFORE STARTING
WHAT’S INCLUDED:
• RED BRACKETS [1]
• RED GUSSET PLATES [2]
• RED GROUND STAKES [3]
• STYROFOAM SHEET(S) (NOT SHOWN)
• LINER (NOT SHOWN)
• HOCKEY PUCKS (NOT SHOWN)
• LINER TAPE (NOT SHOWN)
• QUICKSTART GUIDE (NOT SHOWN)
MATERIAL REQUIRED (NOT INCLUDED):
• 2X4 LUMBER-8 FOOT LENGTHS
• 4X8 PLYWOOD SHEET, 3/8 INCH THICK (CUT
INTO 3 PANELS 15 15/16 INCH WIDTHS)
• SCREWS (NO. 8, 1 1/4 INCH & NO. 10, 1 INCH)
• 3/8 INCH STAPLES
1
2
HAVE A QUESTION?
CALL US 1-844-797-8305 EXT 2
FOR DETAILED INSTRUCTIONS
PLEASE VISIT WWW.ICENGO.COM
BACKYARD RINK KIT QUICK START GUIDE
[1]
V
[2]
[3]
• STAPLE GUN
• CIRCULAR SAW
• SAW HORSE
• SAFETY EQUIPEMENT
(EYE PROTECTION,
GLOVES, SAFETY SHOES,
ETC.)
SCREW HOLE
ACCESS HOLE
• DRILL
• DRIVER BIT (#2)
• DRILL BIT (1/8 INCH)
• TAPE MEASURE
• SQUARE
• LEVEL
• UTILITY KNIFE
TOOLS REQUIRED (NOT INCLUDED):
SEE WOOD & SCREW
CHART FOR QUANTITIES
16’ X 32’ KIT SHOWN
(REFERENCE ONLY)
5743 Ferrier St
Mont-Royal, QC
H4P 1N3

ICE N'GO PRO RINK Specifications

General

Brand	ICE N'GO
Model	PRO RINK
Category	Sports & Outdoors
Language	English

Summary

Ice N' Go Backyard Rink Quick Start Guide

Introduction and Parts Identification

Overview of the rink kit, listing included components and essential tools/materials.

Initial Frame Assembly Steps

Illustrates the first steps of frame construction, showing bracket placement and hole preparation.

Backyard Rink Construction Process

Frame Setup and Squareness Verification

Guide to assembling the rink frame, ensuring proper bracket placement, squareness, and slope management.

Liner Installation and Water Filling

Instructions for installing the liner, adding side supports, and filling the rink with water.