How to fix the “ADD WATER” light on my Ice Ice Maker?
If the “ADD WATER” indicator light turns on for your Ice Ice Maker, it means the water level is low or there is a lack of water. Simply add water, and the ice maker will resume operating automatically.
What to do if the “Ice Full” light is on my Ice 102st Ice Maker?
If the “Ice Full” indicator light is on for your Ice Ice Maker, it means that the ice basket is full. Remove ice from the ice storage basket to make more space.
How to fix ice blockage in my Ice Ice Maker?
If your Ice Ice Maker has an ice blockage and isn't making ice, it may be taking too long to make ice. Turn off the machine and restart it after the ice block melts. Alternatively, change the ice cube size selector to produce smaller ice cubes.
Why is my Ice Ice Maker making no ice even though the cycle seems normal?
If your Ice Ice Maker's ice-making cycle seems normal but no ice is being produced, it may be due to refrigerant leakage or a blocked pipe in the cooling system. Consult a qualified technician or contact Customer Service.
What to do if “Ice Full” and “Add Water” lights are on together on my Ice 102st Ice Maker?
If the “Ice Full” and “Add Water” indicators light up simultaneously on your Ice Ice Maker, it could be due to an electrical power surge, air in the lines, blocked lines, or the water tank's inability to detect the water level. To resolve this, turn off the ice maker, unplug it, add water if necessary, plug it back in, and restart the unit. Alternatively, inspect related parts, remove the drain cap at the back to drain a bit of water, then replace the cap and try again. Also, check for ice blocking the ice pusher; if so, turn off the unit, let the ice melt, and restart. If these steps don't work, contact Customer Service.
Why there is no display on my Ice Ice Maker?
If there is no indication on the control panel of your Ice Ice Maker, check that the plug is properly plugged into the electrical outlet.
Inspect and remove all packing materials before powering on the appliance.
Record model, serial number, and date of purchase for warranty service.
Details on proper wiring, grounding, and extension cord usage for safe operation.
Precautions to take before performing any maintenance or cleaning on the appliance.
Details on buttons, LED indicators, and their functions on the control panel.
Information about the drain cap, rubber plug, and drain spout for water removal.
Steps to prepare the ice maker before initial use, including placement and settling time.
Step-by-step guide on how to fill water, start the machine, and select ice cube size.
To Next Page
General