Why is my ICEE 1612_V1 not making slush?
To ensure your ICEE Dispenser makes slush, verify that salt is exclusively added to the Ice/Salt Inlet. This inlet is clearly marked by the ICE AND SALT indicator located on the Ice Canister Lid.
Why is the mixture not freezing or chilling in my ICEE 1612_V1 Dispenser?
If the mixture in your ICEE Dispenser isn't freezing or chilling, it could be due to two reasons. First, the Ice Canister might not be cold enough; try adding more ice and salt. Second, the mixture you added might be too warm; for best results, chill the syrup mixture for at least 2 hours, or ideally overnight, before using. You can also freeze the Ice Canister for 1 hour before use.
How to fix the motor if it is not spinning in my ICEE Dispenser?
If the motor of your ICEE SLUSHIE Machine is not spinning, turn the machine off, move the frozen blade, and then restart it.
What to do if my ICEE Dispenser is getting too cold too quickly?
If your ICEE SLUSHIE Machine is getting too cold too quickly, it might be due to excessive ice. When you fill the Ice Canister, make sure to leave a 3 cm gap from the top of the ice to the canister rim.
What to do if the Canister Lid comes off my ICEE 1612_V1?
If the Canister Lid of your ICEE Dispenser comes off, it's likely because too much ice is being used. When filling the Ice Canister, ensure you leave a 3 cm gap from the top of the ice to the Ice Canister rim.
Lists precautions and warnings for using the ICEE SLUSHIE Machine safely, including electrical and handling safety.
Instructions on plugging in, setting the Mix/Off/Dispense switch, and ensuring the tap is closed.
Steps for filling the Ice Canister with ice, salt, and water according to instructions.
Guides on slowly pouring the ICEE SLUSHIE syrup mixture into the machine, noting the fill limit.
Details the machine running time, handling jams, and waiting for peaks before dispensing.
Lists common problems like motor not spinning or mixture not freezing and their potential solutions.
To Next Page
General