11
AA6584 1/4-20 X 2 (BLACK)
AA6212 1/4 X 3/4 FLAT
WASHER BLACK
STEP 3:
Attach the two 2V and 2W brackets to each side of the rear wall panel (1F) using three AA6584
black Allen bolts and AA6212 black washers. Brackets when installed should be on the inside of the
panel. See mounted brackets and pay attention to the Square cut out on the right side.
2W 2V
Back panel assembled.
X’s 6
Make sure square cutout is to the right when installing brackets.
Brackets go on the inside of the panel when mounted.
To Next Page
