EasyManua.ls Logo

Iceking RL6150W.E - Maintenance and Adjustments; Replacing the Lamp; Refrigerator Door Reversing Guide

Iceking RL6150W.E
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
--The refrigerator cabinet touches the wall.
--The water tray is in correct place.
There is interior moisture build up Check if
--The air vents are blocked in the refrigerator.
--The door is opened too often
--The room is humid.
--The food is not packaged correctly
--The control is not set correctly according to the surrounding conditions.
The doors will not close completely Check if
--The shelves are out of position
--The gaskets are dirty
--The fridge is not level
Replacing the lamp
1 Remove the plug, cutting off the power supply.
2 According to figure 1 instruction, remove the lamp cover.
3 According to figure 2 instruction, rotation can remove the light bulb, then turn the opposite
way to install the new light bulb.
4 Replace cover, connect power supply.
N
OTE:
Do not use a bulb with a wattage greater than 15W.
Refrigerator door reversing guide
1 Disassemble the screws behind the fixed top with a cross-head screwdriver and remove the
cover from the refrigerator.
2
Remove the screws fixed the hinge with cross-head screwdriver.