10) Ice cubes are empty, rough edges
and very white.
A) Insufficient water in water pan;
unprimed pump.
A) Correct a major water leak.
B) Obstructed spray nozzles. B) Clean.
C) Curtain does not close fully. C) Adjust the curtain, clean scale
(lime) on curtain metal axis.
D) DP 90 and 140 only: buoy and valve
mechanism is obstructed.
D) Check, clean and replace.
11) Machine doesn’t stop even when
bin is full.
A) Faulty or badly adjusted bin
thermostat.
A) Adjust and replace if
necessary.
12) Ice cubes melt in bin. A) Obstruction in drains (within machine
or in premises).
A) Unblock.
To Previous Page
Loading...
Need help?
General
