Version 2.0 2021 IC-IC4B1-01 Copyright by Cy-Tech GmbH 2021 | www.indoorcycling.com
HOW TO ASSEMBLE THE
INDOOR CYCLE
3 & 6MM
MOUNT THE METAL LIMIT STOP (FIG. A) AND THE
PLASTIC CAP (FIG. B) WITH A 3 MM HEX KEY.
7.
A
B
LOOSEN THE SAFETY PIN AND REMOVE
IT USING A 6 MM HEX KEY.
8.
LIFT THE HANDLEBAR TO POSITION 6 AND
SCREW THE POP PIN KNOB COMPLETELY INTO
THE FRAME TO LOCK THE HANDLEBAR STEM.
9.
To Next Page
Loading...
