To Next PageTo Next Page
Need help?Do you have a question about the ICG IC5 and is the answer not in the manual?
General| Resistance Type | Magnetic |
|---|---|
| Console | Yes |
| Max User Weight | 300 lbs |
| Dimensions | 132 x 52 x 120 cm / 52 x 20.5 x 47.2 in |
| Bike Type | Indoor Cycle |
| Q-Factor | 170 mm |
| Connectivity | Bluetooth |
| Drive System | Belt Drive |
| Heart Rate Monitoring | Bluetooth |
| Transport Wheels | Yes |
| Dimensions (L x W x H) | 132 x 52 x 120 cm / 52 x 20.5 x 47.2 in |
Read all precautions and instructions before operating the indoor cycle.
Attach frame components using specified torque (50 NM) and ensure proper bolt tightening.
Do not remove safety pin before handlebar is mounted on slider to prevent injury.
Guide handlebar onto stem, align position '0' and ensure cardboard slides out.
Connect cables, mount stops, remove safety pin, and lock handlebar stem in position.
Attach pedals with correct torque, remove panel, and insert batteries according to polarity.
Test handlebar/seat adjustments, resistance dial, and pop-pin knob functions.
Ensure bike is level, verify emergency brake function, and check crank arm bolts.
Wipe down frame, check all exposed screws, bolts, and nuts for security.
