06
a. Please ensure the chassis is
unfolded before installing the brake bar
and wheels.
Attach the brake bar to the rear of the
chassis as shown above.
a. To attach the rear wheels simply press the centre button whilst pushing on to
each side of the axle. Test this by trying to remove the wheels without pressing the
centre button.
To disassemble the wheels push the centre button and pull.
b. Ensure the silver locking clips are
visible on each side and test this by
pulling the brake bar downwards once
it has been installed.
Step 2: Brake Bar Installation
Step 3: Rear Wheel Installation
Set Up & Assembly
To Next Page
Loading...
