3-1-3
Special Functions
25
CPU revision indication
The revision number of the CPU can be indicated on the
LCD. It is convenient when confirming the CPU
revision
number if the CS-F3060 is not installed in the PC.
¾ Operation
While pushing and holding [P0] and [P3] keys, rotate
[VOL] to turn the power ON.
•
Clone comment and installed optional unit name are
also indicated
User Set Mode
Some functions and items, specified in Set Mode
screen, can be set/adjusted from the transceiver’s
keypad.
¾ User Set Mode Access
①
While pushing and holding [P1] and [P2], rotate [VOL]
to turn the power ON.
•
“SET MODE”
is displayed.
②
Then, push and hold [P0] to enter User Set Mode.
Operation
① Push [P0] several times to select the appropriate
item. Then, push [Side2] or [Side3] to set the desired
level/condition.
•
Available set mode functions are Backlight, LCD
Contrast, Beep, Beep Level, Ringer Level, SQL Level,
AF Min Level, Mic Gain, VOX Gain, VOX Delay (Sec),
Battery Voltage, Signal Moni and System Info*.
② Repeat step ①
for other functions/item setting.
③ Rotate [VOL] to turn the power OFF to exit User Set
Mode.
*Available when LMR (Digital) is selected.
To Next Page
Loading...
Need help?
General
