iCool TWIN - Quick Start Guide; Connecting Water Hoses

05
Owner’s manual for iCool Recovery Systems
Connect the water hoses
Your Twin will be supplied with a pump and water lter combination.
Depending on your order the lter pump models may be different to the
illustration below, however the basic hose connections are the same for
all model pumps.
1. Connect the long hose that has snap ttings on both ends from
the top of the pool to the top of the iCool Twin (3)
2. Connect (6) to the bottom of the iCool Twin (4)
3. Connect (5) to the bottom of the pool (2)
To operate 2 pools simply repeat the illustration for the second pool
STEP 1 & 2
QUICK START GUIDE
The following is a quick start guide to get your iCool up and running quickly, however you should
read the entire manual to get the most out of your iCool.
WARNING
The water level in the pool must be above the water inlet of the
pump or the pump can not start because air will be trapped
2
1
3
5
6
4
1. Top of the pool
2. Bottom of the pool
3. Outlet of chilling system
4. Inlet of chilling system
5. Water inlet to the lter/pump water from bottom of pool
6. Water outlet from lter/pump connect to chilling system (4)