Icotera 86071 User Manual

1
Icotera A/S, Kongevejen 400D, 2840 Holte, Denmark - info@icotera.com
Document version: 1.0
Installation of Icotera optical CPEs and FTUs
Installation Guide for Icotera Fibre Termination Units
and optical Customer-Premises Equipment
Published: February 2017
Document version: 1.0

Icotera 86071 Specifications

General

Brand	Icotera
Model	86071
Category	Gateway
Language	English

Summary

Safety precautions

Power supply requirements

Specifies using only original, certified power supply units for safety and performance.

Storage and operation conditions

Defines acceptable environmental conditions for storing and operating the device.

Installation and connection safety

Guides on safe placement, airflow, and correct port connections for safety.

Fibre optics safety

Mounting location recommendations

Device access and cable management

Airflow and environmental considerations

Stresses the need for adequate airflow and adherence to operating temperature limits.

Mounting the FTU Base

Separating FTU Base and Cover

Preparing FTU for Fibre Cable Insertion

Cutting FTU Cover Openings

Wall Mounting the FTU Base

Guides on preparing wall plugs and attaching the FTU base to the wall using screws.

Fibre Splicing and Coiling

Explains how to splice fibres, coil them correctly, and secure connectors within the FTU base.

Installing the CPE

Attaching CPE to FTU

Details positioning and securing the CPE onto the FTU.

Connecting User Equipment

Dismounting the CPE and opening FTU

Dismounting the CPE

Opening the FTU Case