ICP DAS USA I-7000 Series User Manual

M-7084 User Manual, Rev. A1.3 7PH-013-A13
1
M-7084
User Manual
Warranty
All products manufactured by ICP DAS are under
warranty regarding defective materials for a period of one
year from the date of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for damages resulting
from the use of this product. ICP DAS reserves the right to
change this manual at any time without notification. The
information furnished by ICP DAS is believed to be accurate
and reliable. However, no responsibility is assumed by ICP
DAS for its use, or for any infringements of patents or other
rights of third parties resulting from its use.
Copyright
Copyright 1999 - 2012 ICP DAS. All rights reserved.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.
Date: 2019/3/4

ICP DAS USA I-7000 Series Specifications

General

Series	I-7000
Category	I/O Systems
Manufacturer	ICP DAS USA
Isolation Voltage	3000 VDC
Communication	RS-485
Input Channels	Varies by model
Output Channels	Varies by model
Power Supply	10-30 VDC

Summary

1. Introduction

1.3.1 I/O Specifications

Details the input/output specifications for counter, frequency, and encoder functions.

1.3.2 System Specifications

Lists communication, power, EMS protection, mechanical, and environmental specifications.

1.6 Wiring

1.7 Quick Start

Step-by-step guide for initial module installation, connection, and configuration.

1.8 Default Settings

Lists the factory default settings for protocol, address, type, and baud rate.

1.12 Technical Support

Provides contact information and guidelines for obtaining technical assistance.

2. DCON Protocol

Command Structure and Syntax

2.1 %AANNTTCCFF

Command to set module configuration parameters like address, baud rate, and data format.

2.2 #AA

Command to read data from all input channels of a specified module.

2.3 #AAN

2.12 $AA5VV

2.13 $AA6

2.14 $AA6N

2.17 $AA7CNRVV

2.23 $AAPN

2.32 @AAGN

3. Modbus RTU Protocol

3.1 M-7084 Modbus Address Mapping

Details Modbus register addresses for module parameters, counter values, and settings.

4. Troubleshooting

4.1 Communicating with the module

Provides diagnostic steps for resolving communication issues and no-response scenarios.