ICP DAS USA I-7530A-MR User Manual

I-7530A-MR Modbus RTU to CAN Converter User’s Manual (Version 1.07, 06/2016) ------------- 1
User’s Manual
Warranty
All products manufactured by ICP DAS are under warranty regarding
defective materials for a period of one year from the date of delivery to the
original purchaser.
Warning
ICP DAS assumes no liability for damages resulting from the use of this
product. ICP DAS reserves the right to change this manual at any time without
notice. The information furnished by ICP DAS is believed to be accurate and
reliable. However, no responsibility is assumed by ICP DAS for its use, or for
any infringements of patents or other rights of third parties resulting from its use.
Copyright
Copyright 2016 by ICP DAS. All rights are reserved.
Trademark
The names used for identification only may be registered trademarks of
their respective companies.
The I-7530A-MR Modbus RTU to CAN
Converter

ICP DAS USA I-7530A-MR Specifications

General

Brand	ICP DAS USA
Model	I-7530A-MR
Category	Media Converter
Language	English

Summary

Introduction to I-7530A-MR Converter

Product Features

Overview of the converter's key features and capabilities.

Technical Specifications

Detailed specifications including UART, CAN, and power requirements.

Hardware Overview

Software Utility and Configuration

Install UART2CAN Utility Software

Step-by-step guide to installing the configuration utility.

Configure Module Communication Parameters

Setting up COM port, CAN parameters, and communication modes.

Testing the I-7530A-MR Module

Procedures for testing the module's communication functionality.

Modbus Slave Mode Operation

Supported Modbus Functions

List of Modbus function codes supported in slave mode.

Modbus Register Address Mapping

Definitions for Input and Output registers.

Read CAN Message via Modbus RTU

Using Modbus RTU commands to retrieve CAN messages.

Send CAN Message via Modbus RTU

Using Modbus RTU commands to transmit CAN messages.

Configure Module via Modbus RTU

Modbus Master Mode Operation

Supported Modbus Master Functions

Modbus Read Configuration

Setting up commands to read data from Modbus slave devices.

Response CAN Message Configuration

Modbus Write Configuration

Setting up commands to write data to Modbus slave devices.

Common Configuration Settings