Need help?Do you have a question about the ICP DAS USA WF-2572 and is the answer not in the manual?
General| Brand | ICP DAS USA |
|---|---|
| Model | WF-2572 |
| Category | Network Hardware |
| Language | English |
Lists key features of the WF-2572, including frequency, modes, encryption, and temperature range.
Details the WF-2572 Utility for Wi-Fi configuration via USB interface.
Provides detailed technical specifications for RF, Ethernet, USB, power, casing, and environment.
Describes the physical appearance and layout of the WF-2572 device.
Details the components located on the front panel of the WF-2572, including connectors and LEDs.
Details the power connector and operating mode selector switch on the top panel.
Explains the meaning of various LEDs for signal strength and system status in different modes.
Illustrates how to connect the power supply to the WF-2572 device.
Explains the watchdog timer feature and how to enable or disable it.
Describes the dip-switch used for selecting between firmware update and operation modes.
Details how to set the device to firmware update mode using the dip-switch.
Details how to set the device for normal operation using the dip-switch.
Provides the physical dimensions of the WF-2572 device in millimeters.
Introduces the WF-2572 Utility, a Windows application for wireless configuration.
Explains the main screen of the WF-2572 utility for configuring wireless settings.
Details the various Wi-Fi parameters that can be configured, such as mode, SSID, and encryption.
Explains how to set or retrieve the device's MAC address using the utility.
Describes how to configure the IP settings for the WF-2572 in Limit-AP mode.
Illustrates the system architecture when WF-2572 operates in Infrastructure mode.
Illustrates the system architecture when WF-2572 operates in Limit-AP mode.
Provides a step-by-step guide for installing the WF-2572 hardware.
Details the steps and architecture for configuring the WF-2572 in Infrastructure mode.
Describes the test architecture used to demonstrate Infrastructure mode connectivity.
Provides the specific steps to configure the WF-2572 in Infrastructure mode.
Explains how to query device MAC addresses using the utility or command line.
Details the steps and architecture for configuring the WF-2572 in Limit-AP mode.
Describes the test architecture used to demonstrate Limit-AP mode connectivity.
Provides the specific steps to configure the WF-2572 in Limit-AP mode.
To Next Page
