428 04 5402 00 May 2010
TECHNICAL SUPPORT MANUAL
Split System Heat Pump
(C,H,T)4H3
DANGER, WARNING, CAUTION, and
NOTE
The signal words DANGER, WARNING, CAU-
TION, and NOTE are used to identify levels of haz-
ard seriousness. The signal word DANGER is only
used on product labels to signify an immediate haz-
ard. The signal words WARNING, CAUTION, and
NOTE will be used on product labels and through-
out this manual and other manuals that may apply
to the product.
DANGER − Immediate hazards which will result in
severe personal injury or death.
WARNING − Hazards or unsafe practices which
could result in severe personal injury or death.
CAUTION − Hazards or unsafe practices which
may result in minor personal injury or product or
property damage.
NOTE − Used to highlight suggestions which will
result in enhanced installation, reliability, or opera-
tion.
Signal Words in Manuals
The signal word WARNING is used throughout this
manual in the following manner:
The signal word CAUTION is used throughout this
manual in the following manner:
Signal Words on Product Labeling
Signal words are used in combination with colors
and/or pictures on product labels.
WARNING
Safety Labeling and Signal Words
!
!
CAUTION
WARNING
TABLE OF CONTENTS
Model Number Identification 2.....................
Wiring Diagrams 3...............................
Charging Chart 4.................................
Tech Labels (Expanded Data) 5 − 12................
Cooling Multipying Factors 13 − 17..................
Heating Multipying Factors 18 − 22.................
MODELS
C4H318GKD200 H4H318GKD200 T4H318GKD200
C4H324GKD200 H4H324GKD200 T4H324GKD200
C4H330GKE100 H4H330GKE100 T4H330GKE100
C4H336GKE100 H4H336GKE100 T4H336GKE100
C4H342GKE100 H4H342GKE100 T4H342GKE100
C4H348GKE100 H4H348GKE100 T4H348GKE100
C4H360GKD300 H4H360GKD300 T4H360GKD300
!
WARNING
DEATH, PERSONAL INJURY, AND/OR PROPERTY
DAMAGE HAZARD
Failure to carefully read and follow this warning
could result in equipment malfunction, property
damage, personal injury and/or death.
Installation or repairs made by unqualified per-
sons could result in equipment malfunction, prop-
erty damage, personal injury and/or death.
The information contained in this manual is in-
tended for use by a qualified service technician fa-
miliar with safety procedures and equipped with
the proper tools and test instruments.
Installation must conform with local building
codes and with the National Electrical Code
NFPA70 current edition or Canadian Electrical
Code Part 1 CSA C.22.1.
To Next Page
Need help?
General
