Manual: IB-235-U3
Package content
1x IB-235-U3, 1x USB 3.0 cable, 1x manual
Key features
• External enclosure for 2.5" SATA HDD/SSD
• Interface to PC: USB 3.0 with UASP up to 5 Gbit/s
• For 7 / 9.5 mm HDD/SSD, capacity: no limit
• Toolless installation
• Windows, macOS, Linux compatible
HDD/SSD Installation
During the HDD/SSD assembly all cabling has to be disconnected
from the computer.
Application
1. The external HDD/SSD can be connected to or disconnected from the
computer via USB cable without shutting down the computer.
2. Please await the end of read/write operations before disconnecting the
HDD to avoid data lost.
3. A new HDD/SSD must first be initialised, partitioned and formatted by
the operation system to be displayed by the system.
4. If the hard disc isn't recognised instantly by the operating system please
check:
- if the driver software is installed (USB),
- if the HDD/SSD is initialised, partitioned and formatted.
To Next Page
Loading...
Need help?
General