Need help?Do you have a question about the Icy Box IB-2914MSCL-C31 and is the answer not in the manual?
General| Material | Aluminium, Plastic |
|---|---|
| Plug and Play | Yes |
| Product color | Black |
| LED indicators | Access, Power |
| Maximum data transfer rate | 10 Gbit/s |
| Storage media type | HDD, SSD |
| Storage drive interface | Serial ATA, Serial ATA II, Serial ATA III |
| Storage drive sizes supported | 2.5, 3.5, M.2 \ |
| Country of origin | China |
| Master (outer) case width | 510 mm |
| Master (outer) case height | 255 mm |
| Master (outer) case length | 350 mm |
| Master (outer) case weight | 14000 g |
| Quantity per master (outer) case | 20 pc(s) |
| Package depth | 247 mm |
| Package width | 118 mm |
| Package height | 67 mm |
| Package weight | 660 g |
Weight and Dimensions| Depth | 144 mm |
|---|---|
| Width | 100 mm |
| Height | 59 mm |
Risk of death by electrical shock. Follow safety instructions for handling electrical components.
Plug power adapter into the device and then into a wall socket. Do not use USB cable during cloning.
Switch the device on using the ON/OFF switch.
Select the desired cloning direction using the clone direction switch.
Press and hold the clone button for 5 seconds when target/source LEDs are solid.
Press the clone button again when all LEDs are permanently lit to begin cloning.
Observe LEDs for progress and errors. Do not stop until complete. All LEDs solid indicates success.
Plug USB cable into Type-C port and power adapter into jack.
Plug the power adapter into a household power socket.
Connect the USB cable's Type-C or Type-A plug to your computer.
Turn the device ON using the ON/OFF switch.
To Next Page