Important product information
Dear customer,
please note the following information about the compatibility of USB Type-C
™
hubs and adapters, including this device!
• Your host computer must have at least one free USB 3.0 20 Pin
connector on the mainboard.
• The case of your host computers also needs a free 3.5'' bay.
• The IB-HUB1417-i3 is downwards compatible with USB 2.0/1.1
Type-A and Type-C
™
devices.
• The following operating systems are supported: Windows
®
Packing content:
1x IB-HUB1417-i3
1x USB 3.0 Type-A to USB 3.0 20 Pin cable
1x Set of screws
1x Quick installation quide
Description:
The IB-HUB1417-i3 fills the 3.5'' bay of a computer housing in a senseful
way. Existing devices such as printers, USB sticks with Type-C
™
as well as
Type-A ports, keyboards and SD/MicroSD can be used again easily and
without frustration. The stable, cold-rolled steel body has a high-quality feel
and the simple design makes it the perfect companion for existing and future
purchased devices.
Key features:
• 1 x USB Type-C
™
with a transfer rate up to 5 Gbit/s
• 2 x USB Type-A with a transfer rate up to 5 Gbit/s
• SD and microSD dual card reader (UHS-I) up to 100 MB/s
• Multi-LUN - allows the simultaneous use of two cards
• Fits a standard 3.5'' (8.89 cm) bay
Quick installation guide IB-HUB1417-i3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
