Quick installation guide IB-PCI210
© Copyright 2016 by RaidSonic Technology GmbH. All Rights Reserved.
1. Package contents
1x IB-PCI210, 1x full profile bracket, 1x screw set, 1x manual
2. Installation
2.1 Mount the M.2 SSD with a slight angle into the M.2 slot.
2.2 Fasten the SSD module with the screw.
2.3 Make sure the computer is turned off and all power cables are
disconnected from the system.
2.4 Open the computer case and plug the IB-PCI210 into an available
PCIe slot.
2.5 Secure the bracket on the housing of the PC.
2.6 Close the case and restart your PC.
2x M.2 SSD to PCIe 2.0 x1 card with RAID
To Next Page
Need help?
General
