ID Photonics CoBrite Series - Page 2

____________________________________________________________________
CoBrite Mounting instructions CBDX-ACC-RM-x, CBDX2-ACC-RM-x
2
1 Preface
The following instructions apply to 2 Laser chassis Types, CoBrite DX and DX2.
Pictures in this document show the work performed an a CoBrite DX chassis as an
example.
CoBrite DX CoBrite DX2
2 Content of Kits
2.1 Single unit 19” adaptor CBDX-ACC-RM-1, CBDX2-ACC-RM-1
4 Hex Screws
2 Handles
2 Aluminum side bracket parts (Depending on Type, Adaptor parts will appear
different than in picture)