ID Photonics CoBrite Series User Manual

Critical safety information regarding laser radiation and potential hazards.

Details regulatory compliance, EMC standards, and WEEE disposal directives.

Covers line voltage, service, user feedback, and optical output.

Outlines essential safety precautions for instrument operation and handling.

Describes the CoBriteDX1 tunable laser instrument and its capabilities.

Guides on connecting hardware and installing the control software.

Addresses common issues with instrument detection by the GUI.

Explains the process of tuning the laser across its full available range.

Details fine tuning for precise adjustments within a smaller range.

Lists interface options for different CoBrite chassis variants.

Explains USB port usage and Ethernet port configuration.

Specifies the minimum hardware and software needed for the GUI.

Step-by-step guide for installing the CoBrite control software.

Details connecting the instrument via Ethernet, Mainframe, or USB serial port.

Guides on resolving issues when the instrument is not detected by the GUI.

Provides system overview, tree view, and spectral viewer.

Details setting laser frequency, power, and other parameters.

Explains laser On/Off, SBS, configuration import, and autostart features.

Covers GUI modes, port control, link status, and interlock indicators.

Shows a pictographic view of the chassis and port access.

Provides detailed laser chip and base temperatures, currents, and limits.

Allows tracing communication between GUI software and chassis controller.

Provides info on firmware version and user interface, with download links.

Explains port operation, command syntax, and addressing schemes.

Details system, card-level commands, and notation conventions.

Provides command examples, status queries, and error code definitions.