1.5 Line Voltage Selection
CoBrite Mainframes operate from any single-phase AC power source that supplies
100 ~ 240VAC at a frequency at 50/60 Hz. The input line voltage setting is done
automatically by CoBrite power supply.
1.6 Service
Do not attempt to service or adjust this instrument unless an authorized person is
present. Do not install substitute parts or perform any unauthorized modifications to
this instrument. Contact ID Photonics or your local distributor to obtain service
support.
1.7 Help and User feedback
ID Photonics GmbH is dedicated to continuously improve customer experience of our
products. Thus, if you have any feedback that might help us to improve our products
send us an E-Mail to: feedback@id-photonics.com
To Next Page
Loading...
