1.2.1 International
IEC 60950-1:2005, modified+Cor.:2006 + A1:2009, modified
CISPR 11:2003 in accordance with EN 61326-1: 2006
1.2.2 United States of America
FCC 47 CFR Part 15, Subpart B Class A, Measurement process ANSI C63.4 (2009)
1.2.3 European Union
EN 55022:2011
EN 61326-1: 2006
EN 61000-6-2: 2006
EN 61000-6-4: 2011
EN 61000-3-2: 2010
EN 61000-3-3: 2009
This conformity statement for includes EU directive 2002/95/EG (RoHS) and EU
directive EG1907/2006 (REACH).
1.3 Limitation of communication interfaces
Operation of all USB Ports is limited to a maximum cable length of 3m and a
maximum length of 30m for all Ethernet ports present.
1.4 European WEEE Directive Compliance
ID PHOTONICS has established processes in compliance with the Waste Electrical
and Electronic Equipment (WEEE) Directive, 2002/96/EC. This product should not be
disposed of as unsorted municipal waste and should be collected separately and
disposed of according to your national regulations. In the European Union, all
equipment purchased from ID PHOTONICS can be returned for disposal at the end
of its useful life. ID PHOTONICS will ensure that all waste equipment returned is
reused, recycled, or disposed of in an environmentally friendly manner, and in
compliance with all applicable national and international waste legislation. It is the
responsibility of the equipment owner to return the equipment to ID PHOTONICS for
appropriate disposal. If the equipment was imported by a reseller whose name or
logo is marked on the equipment, then the owner should return the equipment
directly to the reseller. If you have questions concerning disposal of your equipment,
contact ID PHOTONICS’s at WEEE@id-photonics.com.
To Next Page
Loading...
