ID Photonics CoBrite Series - Compliance and Disposal

____________________________________________________________________
CoBrite Mounting instructions CBDX-ACC-RM-x, CBDX2-ACC-RM-x
5
2.2 Dual unit 19” adaptor CBDX-ACC-RM-2, CBDX2-ACC-RM-2
4 Hex Screws (locations A1 & A2)
2 Handles (locations A1 & A2)
2 Aluminum side bracket parts (locations A1 & A2)
2 Aluminum Adaptor center plate (locations B1 & B2)
The picture shows parts for CoBrite DX Chassis