iDataLink maestro SW - Module Reset Procedure

1
OFF
ACC ON
START
2
OFF
ACC ON
START
3
4
5
6
OFF
ACC ON
START
7
mODulE REsET PROCEDuRE - 1 Of 1
Turn key to OFF position.
Press and hold programming button and turn
key to ON position.
Wait, LED will fl ash RED rapidly. (This may
take up to 10 seconds.)
Release programming button.
Wait, LED will turn solid GREEN for 2 seconds.
Turn key to OFF position.
Module reset procedure completed.
www.maestro.idatalink.comAutomotive Data Solutions Inc. © 2012
ADS-SW(SI)-ALL01-AS-IG-EN
PagE 8 Of 8
• 20120913
DOC.: #9729