To Next PageTo Next Page
Need help?Do you have a question about the Ideal-Standard ALTO ECOTHERM A4740AA and is the answer not in the manual?
General| Product Code | A4740AA |
|---|---|
| Product Type | Mixer |
| Range | ALTO ECOTHERM |
| Manufacturer Part Number | A4740AA |
| Material | Brass |
| Finish | Chrome |
| Installation Type | Deck Mounted |
| Flow Rate | 5 l/min |
| Spout Type | Fixed |
| Holes Required | 1 |
| Type | Mixer |
| Warranty | 5 Years |
Details the compliance requirements and recommendations for installing the shower fittings by professionals.
Explains water regulations and preferred arrangements for cylinder tapping for optimal shower performance.
Specifies operating pressure ranges, temperatures, and conditions for use with modulating combi boilers.
Outlines the risk assessment approach for backflow protection based on fluid categories.
Details backflow protection requirements for fluid category 3 risks in showers.
Explains backflow protection requirements for fluid category 5 risks in sinks, WCs, and bidets.
Guides on running 15mm inlet pipes and preparing the wall for the shower fitting.
Instructions on positioning and marking the wall plate for secure fixing.
Details on attaching the wall plate using gaskets and appropriate wall fixings.
Covers trimming pipes to wall bracket level and accounting for tiling thickness.
Steps for fitting olives to pipes and connecting them to the wall mount plate.
Instructions for installing the shroud and securely fitting the shower valve.
Explains how to control water flow, including an economy stop feature.
Details adjusting water temperature, with a 40°C stop and options for cooler/hotter water.
Details how to operate the flow and temperature handles for the A5637AA model.
Procedure to change the maximum mixed water temperature setting on the valve.
Step-by-step guide for re-calibrating the thermostatic cartridge for accurate temperature control.
Guidance on cleaning filter screens and checking strainers to maintain cartridge performance.
Procedures for verifying correct installation and performing regular checks.
Details on performing the CWI test to verify the valve's fail-safe shut-off mechanism.
Outlines the schedule and procedure for annual servicing and testing of the thermostatic valve.
Detailed steps for removing and replacing the thermostatic cartridge for specific models.
Steps for replacing the thermostatic cartridge specific to the A5637AA model.
Procedure to replace the flow control cartridge for different model series.
Detailed steps and conditions for conducting the Cold Water Isolation test.
Guide on how to detach the valve, access, and replace the check valves.
Advice on suitable cleaning agents and methods for the shower valve.
Explains the necessity of isolation valves for maintenance and their recommended placement.
Lists and illustrates all available spare parts for the specified shower valve models.
Lists and illustrates all available spare parts for the A5637AA shower valve model.
