- 11 -
Press the rocker switch (1.) quickly:
green light is on, the machine is now ready
for operation. Starts automatically when
paper is inserted (2.).
Press and keep pressed switch
(1.).
Machine starts and shreds the remaining
paper in the inlet shaft, without contacting
the light beam, afterwards automatic start
when inserting paper.
Stops automatically when no further paper is
inserted. Automatic standby that switches off
after 30 minutes. The machine can be
switched off at any time by pressing the
switch for 2 seconds. (Not possible when the
machine is in reverse motion).
Green LED
control light is off. There will
be no power consumption any more.
•
Operation
•
•
To Next Page
Loading...
