IDEAL 2340 - Resetting and Safety Flap Handling

- 16 -
IDEAL 2340 • IDEAL 2360 • IDEAL 2404 • IDEAL 2503
•
Operation
• •
2.
1.
A
Reset by pressing the rocker switch .
Re-feed the paper in smaller quantities
Automatic stop if safety ap (A) is opened
(symbols
and ash alternatively).
Close the safety ap and press the
rocker switch
, paper is shredded. To
remove any paper debris from a paper
jam the machine runs for a short time
reverse with open safety ap.
If required press the rocker switch "R"
several times.