- 16 -
IDEAL 2445 • IDEAL 2465     
 DE  Schalter   drücken (1.) : grünes Licht 
leuchtet, Maschine betriebsbereit. Autom. 
Anlauf bei Papierzufuhr (2.). Autom. 
Standby - Abschaltung nach 30 Minuten. 
Maschine kann jederzeit durch 2 sec. 
langes Drücken des 
 Schalters 
    ausgeschaltet werden. Grüne 
  Kontrollleuchte 
 erlischt. Danach 
    verbraucht die Maschine keinen Strom 
  mehr. Alle Maschinen haben eine 
    SSC - Anzeige (Smart Shred Control)  
zur Leistungsanzeige beim Vernichten 
des Papiers (A). 
 EN  Press the rocker switch 
 (1.) : green  
light  is on, the machine is now ready 
for operation. Starts automatically when  
paper  is inserted (2.). Automatic standby 
that  switches off after 30 minutes. The 
machine can be switched off at any time 
by pressing the 
 switch for 2 seconds. 
Green LED 
 control light is off.There will 
be no power consumption any more.
  Note: All machines have an SSC- 
Display (Smart Shred Control) which 
indicates the used sheet capacity during 
shredding process (A).
 FR  Appuyer sur la touche 
. Le voyant vert   
indique que la machine est prête à 
    fonctionner. Mise en route automatique 
lors de l’introduction du papier (2.).  
    Mise en veille automatique après
    30 minutes. La machine peut être arrêtée
    à tout moment en appuyant 2 secondes  
    sur l‘interrupteur 
. Le voyant vert s    
    ’éteint. Ceci permet une économie    
  d’énergie.
  Note : Tantes les machines dispose    
    d’un contrôle de capacité électronique  
  (SSC) indiquant la  capacité lors de la    
    destruction du papier (A).
• Bedienung • Operation • Utilisation •