IDEAL 2604 - Shredding Process & Control

- 13 -
IDEAL 2604, IDEAL 3104, IDEAL 3105
IDEAL 4002, IDEAL 4005
Press the rocker switch (1.) : green light
is on, the machine is now ready for
operation. Starts automatically when paper
is inserted. Automatic standby that
switches off after 30 minutes.The machine
can be switched off at any time by pressing
the
switch for off 2 seconds. Green
LED
control light is. There will be no
power consumption any more.
Note: All machines have an ECC- Display
(Electronic Capacity Control) which
indicates the used sheet capacity during
shredding process (A).
•
Operation
• •
IDEAL 2604, IDEAL 3104, IDEAL 3105,
IDEAL 4002, IDEAL 4005
LED shows red (A).
Stops automatically if too much paper is
inserted. Automatic reverse if paper.
LED shows yellow (B).
Maximum sheet capacity during shredding
precess.
LED leuchtet green (C).
Normal sheet capacity during shredding
precess.
IDEAL 2604, IDEAL 3104, IDEAL 3105
IDEAL 4002, IDEAL 4005