Need help?Do you have a question about the IDEAL 4700 U and is the answer not in the manual?
General| Brand | IDEAL |
|---|---|
| Model | 4700 U |
| Category | Booklet makers |
| Language | English |
Prohibits child operation, outdoor use, and cutting certain materials like paper clips.
Machine must be installed on a sturdy, dry, and level floor.
Machine is for paper cutting only and requires one-man operation.
Never leave the blade unattended; operate with all safety devices in place.
Instructions for returning the blade lever to the top locked position after each cut.
Steps for unpacking and assembling the machine stand using provided parts.
Identification of machine controls and parts with labels (A-L).
Verify safety devices and understand operating instructions before use.
How to set the desired cut dimension using the backgauge crank and scale.
Placing paper against backgauge and side gauge with blade lever locked.
Fixing the paper stack with the clamp and performing the cut.
Checks for cutting depth, cutting stick, and blade sharpness/replacement.
Step-by-step guide for removing the front cover and the blade.
Instructions for removing the blade using the changing tool.
Information on turning, replacing, or exchanging the cutting stick.
Screwing the exchange blade onto the blade changing tool with correct spacing.
Adjusting blade depth to create a visible light gap with the cutting stick.
Fine-tuning blade height using adjusting screws and checking for proper cut.
Reassembling covers and handwheel, performing a trial cut, and adjusting if needed.
Lubricating moving parts and cleaning dust, old oil, and grease.
Solutions for blade lever not falling and cuts not being completed.
Addresses issues like dull blades, requiring blade changes or sharpening.
Information on contacting customer service for unresolved problems.
Lists recommended spare parts like blades, cutting sticks, and blade changing tools.
To Next Page