Turning The Tester On
Press the Power On/Off button for less than 1s to turn the tester On. The tester
will beep twice, and will light a steady Green LED in the tip of the tester to indicate
Power On.
Turning The Tester Off
Press the Power On/Off button for more than 1s to turn the tester Off. Listen for a
long steady beep (~.5s) and watch for LED in the tip to turn off. The tester is now
deactivated and is not operational.
11
Tester Operation
Steady Green LED in the tip
indicates power-on
To Next Page
Loading...
