IDEALI TD02 User Manual

TD02
TD02
TD02-16338-700
INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TD02-16338-700
* Please read these instructions carefully before operation this appliance.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
- Never connect two or more appliances in the same power outlet.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. Handle carefully.
- Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic spatula may be
used but only when blender is "NOT RUNNING".
- Only remove the container when blender "COMPLETELY STOPPED".
INSTRUCTIONS FOR USE
- Blender control is made by switch ( ON - OFF)
- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
- To start blender place small quantity of food before connecting it, and afterwards complete
container.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-
conneting to the main power outlet.
The pictures/drawings are illustrations. All data can be changed without notification.
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari
Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: 55 21 2777- 8100 / 55 21 2777-8106
e-mail: croydon@croydon.com.br - www.croydon.com.br

IDEALI TD02 Specifications

General

Brand	IDEALI
Model	TD02
Category	Blender
Language	English

Summary

Important Safety Precautions

Electrical Safety

Check voltage, avoid water immersion of base/motor, do not overload outlets, unplug when not in use.

Operational Safety

Avoid starting empty, handle blades carefully, keep hands/utensils away from moving parts.

Container Handling

Only remove container when blender has completely stopped.

Operating and Cleaning Procedures

Instructions for Use

Use ON-OFF switch, cut food small, avoid spilling, do not remove lid while running.

Troubleshooting Operation

If blender stops, turn off, remove lid, push mixture towards blades with spatula.

Cleaning Procedure

Clean cup with soapy water, run for seconds, rinse, wipe body with damp cloth.

Cleaning Precautions

Do not use harsh detergents, avoid water jets or immersion, dry switch before reconnecting.

Blender Components and Specifications

Component Identification

Detailed diagrams and part lists for container assembly and base assembly.

Technical Data

Voltage, power, amperage, speed, capacity, weight, and dimensions for TD02-16338-700.