７
BLADE REPLACEMENT
Make sure the engine is stopped before replacing the blades. Wear gloves to handle the
blades.
1. Ｒemove the bottom disc fixing bracket.
※Be careful not to jump out the bottom disc fixing
bracket while mounting it.
2. Ｒemove the bottom disc.
3. Ｒemove the upper and the lower blades.
4. Clean up the body with a brush to remove grass and dirt
and wash it with water.
5.
Wipe the body and dry it. Then wipe it with an oily cloth
before installing the blades.
6. Mount the upper and the lower blades.
7. Mount the bottom disc.
Clean up main body and bottom
disc before mounting new blade
WARNING
*To replace the blade, exclusive long nose pliers or snap
ring pliers is required.
①
②
Bottom disc fixing pins (5)
Bevel
8. Mount the bottom disc fixing bracket.
To Next Page
Loading...