The Fitzpatrick Company D6B Manual Ver 1_24 Jan 2012-DRAFT.doc
A Unit of Corporation Page 12 of 49
Parameter Sheets: (Standard)
Includes Variable Frequency Drive (VFD) specifications and parameter settings for
machines so equipped.
PLC & OIU Programs: (Optional)
Includes software code for machines controlled via Fitzpatrick supplied PLC and
Operator Interface.
Reference Drawings: (Standard)
Includes specific drawings relevant to the design and construction of your machine.
Typically includes General Arrangement / Layout, major assembly drawings, Electrical
Layout and Wiring Diagrams, Process & Instrument Diagram (P&ID optional) and
miscellaneous others.
Security & Password Procedures: (Optional)
Includes procedures for software access and control, for machines supplied with security
enabled software.
Spare Parts List: (Standard)
Includes a Recommended Spare Parts List for your machine
Specification Sheet: (Standard)
Includes a detailed specification sheet which references specific configuration details,
assemblies and components of your machine
Start-up Report: (Optional)
Includes the electrical controls set-up and check-out information, as documented during
final testing of your machine. Only provided on machines with computer based control.
Trouble Shooting Guide: (Standard)
Includes a trouble shooting guide (also in your manual) to aid the user in the resolution of
common operating faults.
Vendor Calibration Certificates: (Optional)
Includes calibration certificates for OEM supplied instruments & devices, when the
machine is so equipped.
Vendor Literature: (Standard)
Includes operating manuals, specification sheets and miscellaneous data for OEM
supplied components of your machine.
To Next Page
Loading...