The Fitzpatrick Company D6B Manual Ver 1_24 Jan 2012-DRAFT.doc
A Unit of Corporation Page 11 of 49
SECTION 2: Machine Systems Overview
2.1 How To Use Your Operating Manual
Your Fitz®Mill Operating Manual has been provided to you on
CD-ROM and includes a series of folders; each containing
specific information relevant to your Comminuting machine.
Below is a brief description of what is to be included in each
folder. Depending on how your machine is configured and
controlled, and whether or not specific quality documents were
requested with your order, you may not receive all the folders
shown below. Those supplied with all machines are designated
as “STANDARD”.
Fitzpatrick Calibration Procedures: (Optional)
Includes procedures for calibration of machine systems and instruments for machines so
equipped.
Functional Description: (Optional)
Written functional description of the machine / system and its controls. Supplied with the
Advanced Documentation Package.
Inspection Report: (Standard)
Signed final inspection report, as issued by Fitzpatrick QC department, prior to shipment
of your machine.
Operating and Parts Manual (Standard)
Includes the text file that forms the main body of your machine Operating Instruction
Manual (includes this document).
Material Certification: (Optional)
Includes certified material test certificates, when specified with your order.
Operator Interface Document: (Optional)
Includes a written description and specification of your machine Operator Interface and
Software, for machines so equipped.
Operator Interface Screens (Optional)
Includes screen shots of all Operating Interface screens, for machines so equipped.
To Next Page
Loading...