This manual is intended for users of the DA-AP3000 mounting bracket. It
includes instructions for mounting the DA-AP3000 mounting bracket to another
bracket.
• This bracket is intended to be used with a specic model of camera.
Do not use it with other models of cameras.
• This installation should be performed by a qualied service
personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling as follows:
1
Mount bracket onto another bracket(DA-MA2000) and
x it by using the screws.
Bracket
(DA-MA2000)
Connect your camera to the bracket as follows:
2
Screw the bottom cover onto bracket.
Bracket
Camera
DA-AP3000 INSTALLATION MANUAL
To Next Page
Need help?
General