Need help?Do you have a question about the iDM iPump A 3-11 and is the answer not in the manual?
Crucial safety warnings for installation and operation, emphasizing specialist work.
Specifications for the installation environment, including temperature and ventilation.
Procedures for cleaning the unit and importance of regular servicing.
Defines the primary applications and limitations for the iPump A heat pump.
Comprehensive table of performance, dimensions, and operational data for iPump A.
Detailed heat output and power consumption data for iPump A 3-11.
Detailed cooling capacity and EER data for iPump A 3-11.
Graphical representation of iPump A 3-11 heating output at 35°C flow temperature.
Graphical representation of iPump A 3-11 heating output at 45°C flow temperature.
Graphical representation of iPump A 3-11 heating output at 55°C flow temperature.
Graphs showing iPump A 3-11 heating capacity across different flow temperatures.
Instructions for refilling refrigerant based on pipe length for iPump A 3-11.
Guidance on permissible vertical distances between indoor and outdoor units for iPump A 3-11.
Diagram and explanation of the valid operating range for heating mode.
Diagram and explanation of the valid operating range for cooling mode.
Step-by-step guide for safely removing the front panel of the iPump.
Procedure for disconnecting various sensors and network cables.
Safety and regulatory requirements for electrical connections.
Diagram showing the wiring and connections of the central control module.
Essential checks and steps before starting up the heat pump system.
Detailed technical specifications and performance data for the iPump A 2-7 model.
Detailed technical specifications and performance data for the iPump A 3-11 model.
To Next Page
General
