To Next PageTo Next Page
Need help?Do you have a question about the IDROFOGLIA TURBOCAR IG1.1 and is the answer not in the manual?
Explains the manual's purpose for safety, handling, installation, and operation.
Details manual structure, chapter division, and page numbering.
Covers picture numbering, table numbering, abbreviations, and units of measure.
Provides guidelines for storing the manual safely and properly.
Explains how the manual is updated and the user's role.
Defines who should use the manual and their required qualifications.
Lists uncommon terms and explains abbreviations and pictorials.
Explains symbols and their meanings, emphasizing safety information.
Explains safety pictograms for prohibitions and mandatory actions.
Emphasizes the importance of following operating manual instructions for safe use.
Provides the manufacturer's name, registered office, and contact details.
Explains the importance and location of the machine's identification plate.
Presents the declaration of conformity and relevant standards.
Lists compliance with various safety regulations and standards.
Details warranty conditions, exclusions, and technical support information.
Explains how the hose reel irrigator operates, including its main components.
Lists and describes the primary components of the TURBOCAR machine.
Presents weights and overall dimensions in tabular format.
States the machine does not require special environmental conditions and is for outdoor installation.
Provides sound pressure level measurements at different distances.
Details various technical specifications related to pressure, flow rate, and speed.
States the machine is not supplied with tools, with an exception for control units.
Describes the digital metre counter and optional control unit for speed adjustment.
Lists the components included in the standard supply for commissioning.
Lists various optional accessories available for the TURBOCAR models.
Provides crucial safety instructions and prohibitions for machine operation.
Disclaims manufacturer liability for damages caused by improper machine use.
Highlights the need to address faults before starting and report dangerous abnormalities.
Defines the machine's intended agricultural use and operator responsibilities.
Lists specific uses and conditions under which the turbocar must not be operated.
Identifies hazardous areas on or near the machine during operation.
Lists the safety devices installed on the machine for protection.
Details the danger, prohibition, and obligation signs to be displayed.
Identifies residual risks that remain after protection measures are implemented.
Instructions for verifying received materials against transport documents and identifying damages.
Guidelines for storing the machine and its components safely and properly.
Procedures for safely lifting, handling, and unloading the machine using appropriate equipment.
Procedures and precautions for towing the turbocar to its operational location.
General rules for assembling the machine and its components safely.
Detailed steps for assembling wheel supports and wheels if disassembled.
Instructions for assembling the drawbar, eye, and boom feet if they were disassembled.
Steps for assembling the turntable, holder, and slewing motor if delivered separately.
Instructions for assembling the spades onto the machine's extension.
Steps for assembling the trolley loader and vertical extensions.
Guidelines for assembling the water system if it was disassembled for transport.
Instructions for assembling various components and accessories like casing, solar panel, etc.
Preparation steps for connecting the machine to the irrigator trolley, including hose unwinding.
Steps for preparing the irrigator trolley, including fixing the irrigator.
Instructions for connecting and securing the hose to the irrigator trolley.
Describes stages of mounting the trolley for irrigation, including lowering, reeling, and hitching.
Instructions for safely connecting the starter batteries, including precautions.
Procedures for topping up and charging the machine's battery.
Pre-startup checks and safety procedures required before commissioning the machine.
Details pre-operation checks, visual inspection, and safety precautions before starting.
Breaks down the startup process into paying out, irrigation, and quick reeling in.
Step-by-step guide for paying out the hose, including connections and precautions.
Instructions on how to start and perform irrigation, including pressure and water flow.
Instructions for reeling in the hose using the PTO as an alternative method.
Procedures for adjusting hose reeling speed and gear selection.
Explains how to adjust reeling speed using the bypass lever.
Details the adjustment of the bypass valve for consistent hose reeling speed.
Instructions for shifting gears while stationary or during irrigation.
Procedures for safely shutting down the machine after irrigation.
General safety advice and importance of regular maintenance.
Refers to periodic checks and maintenance of machine components.
Provides a table detailing maintenance tasks and their frequency.
Encourages contacting the manufacturer for information and questions.
Advises using only original spare parts and warns about warranty implications.
States the user's responsibility for proper waste disposal according to local laws.
Outlines operations for decommissioning and dismantling the machine.
Emphasizes establishing procedures and informing employees on safe use and emergencies.
General| Brand | IDROFOGLIA |
|---|---|
| Model | TURBOCAR IG1.1 |
| Category | Farm Equipment |
| Language | English |
