To Previous Page

3. Error Codes

3.1. Error 205

Error code 205 indicates an invalid user. Someone else has been made master user of that

HYYP hub.

3.2. Error 206

Error code 206 indicates that the hub is busy. When the HYYP hub is connected to a panel it

sends all the panels data to the app server, this can take up to 10 minutes. Wait 10 minutes

before trying again.

*Check the panel version is 2.52 or higher and that there are no blank zone names.

3.3. Error 207

Error 207 indicates the commands time stamp is outdated. This could be due to the network

delaying the message.

3.4. Error 208

Error 208 indicates that communication to the panel has timed out. This often happens if the

serial code hasn’t been set. Set the serial code in location 196.

3.5. Error 210

Error 210 indicates the panel has rejected the serial code. Try programming the serial code

again in location 196. Make sure the HYYP Hub is connected to the panel when the serial code

is programmed.

Other manuals for IDS HYYP

Questions and Answers:

Need help?

Do you have a question about the IDS HYYP and is the answer not in the manual?

General